We offer a wide range of positioners, including single-, dual- and three-axis models, all standardised to ensure quality and efficiency.
We can customise our equipment, with the aim of providing tailor-made solutions for each project to ensure the highest level of customer satisfaction.
We offer a wide range of positioners, including single-, dual- and three-axis models, all standardised to ensure quality and efficiency.
We can customise our equipment, with the aim of providing tailor-made solutions for each project to ensure the highest level of customer satisfaction.
Our PS series is designed to fabricate parts of different diameters, from small to large, by using clamping fixtures and a limited length.
This enables lifting and rotation of the part, making it easier to work in the optimal position for each task required.
Our Silmeca Smart Control software ensures full machine control by making all its power available to the user.
Our equipment achieves high precision for the most demanding jobs with the Precision Motion servos option.
* Scroll over the table to see all the options.
| MODEL | Volume(kg) | a (mm) | C1( m.kg) | V1(tr/min) | Regul V1 | V2(cm/min) |
min. axis H (mm) |
max.axis H (mm) |
D1( mm) | E(mm) |
| PS-15 | 1.500 | 500 | 250 | 0,1 to 1 | No | 100 | 700 | 2.100 | 1.000 | 25 |
| PS-15S | 1.500 | 500 | 250 | 0,05 to 1 | +/- 1 % speed | 100 | 700 | 2.100 | 1.000 | 25 |
| PS-40 | 4.000 | 500 | 500 | 0,1 to 1 | No | 100 | 700 | 2.100 | 1.000 | 30 |
| PS-40S | 4.000 | 500 | 500 | 0,02 to 0,4 | +/- 1 % speed | 100 | 700 | 2.100 | 1.000 | 30 |
| PS-60 | 6.000 | 500 | 720 | 0,1 to 1 | No | 100 | 800 | 2.100 | 1.200 | 35 |
| PS-60S | 6.000 | 500 | 720 | 0,02 to 0,4 | +/- 1 % speed | 100 | 800 | 2.100 | 1.200 | 35 |
| PS-80 | 8.000 | 500 | 960 | 0,1 to 1 | No | 100 | 800 | 2.100 | 1.200 | 40 |
| PS-80S | 8.000 | 500 | 960 | 0,01 to 0,2 | +/- 1 % speed | 100 | 800 | 2.100 | 1.200 | 40 |
| PS-100 | 10.000 | 500 | 1.200 | 0,1 to 1 | No | 100 | 900 | 2.100 | 1.400 | 45 |
| PS-100S | 10.000 | 500 | 1.200 | 0,01 to 0,2 | +/- 1 % speed | 100 | 900 | 2.100 | 1.400 | 45 |
| PS-160 | 16.000 | 500 | 1.900 | 0,1 to 1 | No | 100 | 900 | 2.100 | 1.400 | 50 |
| PS-160S | 16.000 | 500 | 1.900 | 0,01 to 0,2 | +/- 1 % speed | 100 | 900 | 2.100 | 1.400 | 50 |
With Servo Precision Motion option (S)
Our PD series is designed to manufacture parts of different diameters, from small to large, by using clamping fixtures. It enables work on parts of greater length, which can vary throughout the process.
This design lets you lift and rotate the part, as well as separating the free section. It also enables you to implement new part sections until the structure is completed. That way the work is performed in the best position for each of the tasks required.
Our Silmeca Smart Control software ensures full machine control by making all its power available to the user.
Our equipment achieves high precision for the most demanding jobs with the Precision Motion servos option.
* Scroll over the table to see all the options.
| MODEL | Volume (kg) | a (mm) | C1( m.kg) | V1(tr/min) | Regul V1 | V2(cm/min) |
min. axis H (mm) |
max.axis H (mm) |
D1( mm) | E(mm) |
| PD-15 | 3.000 | - | 250 | 0,1 to 1 | No | 100 | 700 | 2.100 | 1.000 | 25 |
| PD-15S | 3.000 | - | 250 | 0,05 to 1 | +/- 1 % speed | 100 | 700 | 2.100 | 1.000 | 25 |
| PD-40 | 8.000 | - | 500 | 0,1 to 1 | No | 100 | 700 | 2.100 | 1.000 | 30 |
| PD-40S | 8.000 | - | 500 | 0,02 to 0,4 | +/- 1 % speed | 100 | 700 | 2.100 | 1.000 | 30 |
| PD-60 | 12.000 | - | 720 | 0,1 to 1 | No | 100 | 800 | 2.100 | 1.200 | 35 |
| PD-60S | 12.000 | - | 720 | 0,02 to 0,4 | +/- 1 % speed | 100 | 800 | 2.100 | 1.200 | 35 |
| PD-80 | 16.000 | - | 960 | 0,1 to 1 | No | 100 | 800 | 2.100 | 1.200 | 40 |
| PD-80S | 16.000 | - | 960 | 0,01 to 0,2 | +/- 1 % speed | 100 | 800 | 2.100 | 1.200 | 40 |
| PD-100 | 20.000 | - | 1.200 | 0,1 to 1 | No | 100 | 900 | 2.100 | 1.400 | 45 |
| PD-100S | 20.000 | - | 1.200 | 0,01 to 0,2 | +/- 1 % speed | 100 | 900 | 2.100 | 1.400 | 45 |
| PD-160 | 32.000 | - | 1.900 | 0,1 to 1 | No | 100 | 900 | 2.100 | 1.400 | 50 |
| PD-160S | 32.000 | - | 1.900 | 0,01 to 0,2 | +/- 1 % speed | 100 | 900 | 2.100 | 1.400 | 50 |
With Servo Precision Motion option (S)
Our P3E series is designed to manufacture parts with diameter and length dimensions within the chosen machine’s range. It lets you lift, tilt and rotate the part to perform the work at the most appropriate position for each task required.
Combining these three movements enables more precise positioning for parts with work areas that require multiple inclinations and positions, without the need to use cranes for processes such as boiler making, welding and final assembly, among others.
Our Silmeca Smart Control software ensures full machine control by making all its power available to the user.
Our equipment achieves high precision for the most demanding jobs with the Precision Motion servos option.
* Scroll over the table to see all the options.
| MODEL |
Volume (kg) |
C1 (m.kg) |
V1 ( m.kg) |
C2 (m.kg) |
V2 (rpm) |
V3 (m/min) |
C (mm) |
min.axis H (mm) |
max.axis H (mm) |
D (mm) |
D1 ( mm) |
L (mm) |
| P3E-2 | 200 | 20 | 0,5 to 2,5 | 150 | 1,0 | 2,0 | 150 | 700 | 1.800 | 500 | 800 | 500 |
| P3E-2S | 200 | 20 | 0,15 to 4,5 | 150 | 1,0 | 2,0 | 150 | 700 | 1.800 | 500 | 800 | 500 |
| P3E-5 | 500 | 75 | 0,5 to 2,5 | 300 | 1,0 | 2,0 | 200 | 700 | 1.800 | 1.000 | 1.800 | 1.000 |
| P3E-5S | 500 | 75 | 0,15 to 4,5 | 300 | 1,0 | 2,0 | 200 | 700 | 1.800 | 1.000 | 1.800 | 1.000 |
| P3E-15 | 1.500 | 250 | 0,5 to 2,5 | 500 | 1,0 | 1,5 | 250 | 700 | 2.000 | 1.000 | 1.800 | 1.000 |
| P3E-15S | 1.500 | 250 | 0,15 to 4,5 | 500 | 1,0 | 1,5 | 250 | 700 | 2.000 | 1.000 | 1.800 | 1.000 |
| P3E-30 | 3.000 | 400 | 0,5 to 1 | 900 | 0,8 | 1,5 | 300 | 800 | 2.200 | 1.000 | 2.000 | 1.200 |
| P3E-60 | 6.000 | 600 | 0,5 to 1 | 1500 | 0,8 | 1,5 | 300 | 800 | 2.200 | 1.000 | 2.000 | 1.200 |
| P3E-100 | 10.000 | 1.000 | 0,5 to 1 | 2.500 | 0,5 | 1,0 | 350 | 1.000 | 2.400 | 1.300 | 2.500 | 1.500 |
| P3E-150 | 15.000 | 1.500 | 0,5 to 1 | 4.000 | 0,5 | 1,0 | 350 | 1.000 | 2.400 | 1.300 | 2.500 | 1.500 |
With Servo Precision Motion option (S)
Our PS series is designed to fabricate parts of different diameters, from small to large, by using clamping fixtures and a limited length.
This enables lifting and rotation of the part, making it easier to work in the optimal position for each task required.
Our Silmeca Smart Control software ensures full machine control by making all its power available to the user.
Our equipment achieves high precision for the most demanding jobs with the Precision Motion servos option.
* Scroll over the table to see all the options.
| MODEL | Volume(kg) | a (mm) | C1( m.kg) | V1(tr/min) | Regul V1 | V2(cm/min) |
min. axis H (mm) |
max.axis H (mm) |
D1( mm) | E(mm) |
| PS-15 | 1.500 | 500 | 250 | 0,1 to 1 | No | 100 | 700 | 2.100 | 1.000 | 25 |
| PS-15S | 1.500 | 500 | 250 | 0,05 to 1 | +/- 1 % speed | 100 | 700 | 2.100 | 1.000 | 25 |
| PS-40 | 4.000 | 500 | 500 | 0,1 to 1 | No | 100 | 700 | 2.100 | 1.000 | 30 |
| PS-40S | 4.000 | 500 | 500 | 0,02 to 0,4 | +/- 1 % speed | 100 | 700 | 2.100 | 1.000 | 30 |
| PS-60 | 6.000 | 500 | 720 | 0,1 to 1 | No | 100 | 800 | 2.100 | 1.200 | 35 |
| PS-60S | 6.000 | 500 | 720 | 0,02 to 0,4 | +/- 1 % speed | 100 | 800 | 2.100 | 1.200 | 35 |
| PS-80 | 8.000 | 500 | 960 | 0,1 to 1 | No | 100 | 800 | 2.100 | 1.200 | 40 |
| PS-80S | 8.000 | 500 | 960 | 0,01 to 0,2 | +/- 1 % speed | 100 | 800 | 2.100 | 1.200 | 40 |
| PS-100 | 10.000 | 500 | 1.200 | 0,1 to 1 | No | 100 | 900 | 2.100 | 1.400 | 45 |
| PS-100S | 10.000 | 500 | 1.200 | 0,01 to 0,2 | +/- 1 % speed | 100 | 900 | 2.100 | 1.400 | 45 |
| PS-160 | 16.000 | 500 | 1.900 | 0,1 to 1 | No | 100 | 900 | 2.100 | 1.400 | 50 |
| PS-160S | 16.000 | 500 | 1.900 | 0,01 to 0,2 | +/- 1 % speed | 100 | 900 | 2.100 | 1.400 | 50 |
With Servo Precision Motion option (S)
Our PD series is designed to manufacture parts of different diameters, from small to large, by using clamping fixtures. It enables work on parts of greater length, which can vary throughout the process.
This design lets you lift and rotate the part, as well as separating the free section. It also enables you to implement new part sections until the structure is completed. That way the work is performed in the best position for each of the tasks required.
Our Silmeca Smart Control software ensures full machine control by making all its power available to the user.
Our equipment achieves high precision for the most demanding jobs with the Precision Motion servos option.
* Scroll over the table to see all the options.
| MODEL | Volume (kg) | a (mm) | C1( m.kg) | V1(tr/min) | Regul V1 | V2(cm/min) |
min. axis H (mm) |
max.axis H (mm) |
D1( mm) | E(mm) |
| PD-15 | 3.000 | - | 250 | 0,1 to 1 | No | 100 | 700 | 2.100 | 1.000 | 25 |
| PD-15S | 3.000 | - | 250 | 0,05 to 1 | +/- 1 % speed | 100 | 700 | 2.100 | 1.000 | 25 |
| PD-40 | 8.000 | - | 500 | 0,1 to 1 | No | 100 | 700 | 2.100 | 1.000 | 30 |
| PD-40S | 8.000 | - | 500 | 0,02 to 0,4 | +/- 1 % speed | 100 | 700 | 2.100 | 1.000 | 30 |
| PD-60 | 12.000 | - | 720 | 0,1 to 1 | No | 100 | 800 | 2.100 | 1.200 | 35 |
| PD-60S | 12.000 | - | 720 | 0,02 to 0,4 | +/- 1 % speed | 100 | 800 | 2.100 | 1.200 | 35 |
| PD-80 | 16.000 | - | 960 | 0,1 to 1 | No | 100 | 800 | 2.100 | 1.200 | 40 |
| PD-80S | 16.000 | - | 960 | 0,01 to 0,2 | +/- 1 % speed | 100 | 800 | 2.100 | 1.200 | 40 |
| PD-100 | 20.000 | - | 1.200 | 0,1 to 1 | No | 100 | 900 | 2.100 | 1.400 | 45 |
| PD-100S | 20.000 | - | 1.200 | 0,01 to 0,2 | +/- 1 % speed | 100 | 900 | 2.100 | 1.400 | 45 |
| PD-160 | 32.000 | - | 1.900 | 0,1 to 1 | No | 100 | 900 | 2.100 | 1.400 | 50 |
| PD-160S | 32.000 | - | 1.900 | 0,01 to 0,2 | +/- 1 % speed | 100 | 900 | 2.100 | 1.400 | 50 |
With Servo Precision Motion option (S)
Our P3E series is designed to manufacture parts with diameter and length dimensions within the chosen machine’s range. It lets you lift, tilt and rotate the part to perform the work at the most appropriate position for each task required.
Combining these three movements enables more precise positioning for parts with work areas that require multiple inclinations and positions, without the need to use cranes for processes such as boiler making, welding and final assembly, among others.
Our Silmeca Smart Control software ensures full machine control by making all its power available to the user.
Our equipment achieves high precision for the most demanding jobs with the Precision Motion servos option.
* Scroll over the table to see all the options.
| MODEL |
Volume (kg) |
C1 (m.kg) |
V1 ( m.kg) |
C2 (m.kg) |
V2 (rpm) |
V3 (m/min) |
C (mm) |
min.axis H (mm) |
max.axis H (mm) |
D (mm) |
D1 ( mm) |
L (mm) |
| P3E-2 | 200 | 20 | 0,5 to 2,5 | 150 | 1,0 | 2,0 | 150 | 700 | 1.800 | 500 | 800 | 500 |
| P3E-2S | 200 | 20 | 0,15 to 4,5 | 150 | 1,0 | 2,0 | 150 | 700 | 1.800 | 500 | 800 | 500 |
| P3E-5 | 500 | 75 | 0,5 to 2,5 | 300 | 1,0 | 2,0 | 200 | 700 | 1.800 | 1.000 | 1.800 | 1.000 |
| P3E-5S | 500 | 75 | 0,15 to 4,5 | 300 | 1,0 | 2,0 | 200 | 700 | 1.800 | 1.000 | 1.800 | 1.000 |
| P3E-15 | 1.500 | 250 | 0,5 to 2,5 | 500 | 1,0 | 1,5 | 250 | 700 | 2.000 | 1.000 | 1.800 | 1.000 |
| P3E-15S | 1.500 | 250 | 0,15 to 4,5 | 500 | 1,0 | 1,5 | 250 | 700 | 2.000 | 1.000 | 1.800 | 1.000 |
| P3E-30 | 3.000 | 400 | 0,5 to 1 | 900 | 0,8 | 1,5 | 300 | 800 | 2.200 | 1.000 | 2.000 | 1.200 |
| P3E-60 | 6.000 | 600 | 0,5 to 1 | 1500 | 0,8 | 1,5 | 300 | 800 | 2.200 | 1.000 | 2.000 | 1.200 |
| P3E-100 | 10.000 | 1.000 | 0,5 to 1 | 2.500 | 0,5 | 1,0 | 350 | 1.000 | 2.400 | 1.300 | 2.500 | 1.500 |
| P3E-150 | 15.000 | 1.500 | 0,5 to 1 | 4.000 | 0,5 | 1,0 | 350 | 1.000 | 2.400 | 1.300 | 2.500 | 1.500 |
With Servo Precision Motion option (S)
